Jason is now doing a flatbow. I will still be doing the molle.
- 60″ tip to tip
- Tip width: 1/2″
- Taper: from the Tip to 16″ down the limb.
- Full thickness of the bow 1.75″
Step 2: Jason is now going to make a dots. The 1st will be at the end of the riser fade from the back of the bow up 5/8″ toward the belly. Another dot at the tip will be from the back up 3/8″ toward the belly. Connect the dots and repeat on the other side. All wood above these lines (from the belly side down) is removed.
How to Build a Bow: Tapering the Back and Belly
Subscribe to Boarrior Bows at: